Large Arduino MKR Prototyping PCB

A large (100mm x 100mm) prototyping PCB for the Arduino Arduino MKR Series (MKR 1000, MKR FOX 1200).

  • Large breakout area on the lower half.
  • Arduino pins connected to breakout pads either side of the device.
  • Double 1206 pads for D0-D7 top side for resistor + led combination, useful for diagnostics on pins.
  • External connector holes either side of lower half with double collected holes to allow for easy PCB connection to the connector.
  • 1206 pads linking external connector pads to internal breakout nearest pad to allow for easy link with resistor.
  • 3v3 and GND available down the middle of the breakout area and across the top.
  • 4x SOIC08 8 pin SMD pads with connected holes.
  • 4x M3 mounting holes.
  • Reverse mount LED and resistor pads for 3v3 power light.
  • Pads for external power input via DC jack barrel (2.1/2.5mm) or 2 Pin 5mm terminal block and layout for "7805" style buck regulator.
  • Arduino pin functions on PCB silk screen top and bottom.
  • 2x 1206 pads for I2C pullups on SDA and SCL.
  • Suitable for Arduino MKR 1000 and MRK FOX 1200.

PCB Top Layer
PCB Bottom Layer
PCB All Layers

  • Length: 100mm
  • Width: 100mm
  • Hole 1: 3.2mm at 5,5
  • Hole 2: 3.2mm at 95,5
  • Hole 3: 3.2mm at 95,95
  • Hole 3: 3.2mm at 5,95

Buy on Tindie.